FQEWOGPV"PQ0" TGX0PQ" RCIG
UVCPFCTF"
PCOG"
"
3:13;
This instruction
(1) Loads a new 7-bit address into the address counter (ACC).
(2) Sets the address counter (ACC) to point to the DD-RAM.
Once the “Set DD-RAM Address” instruction has been executed, the contents of the address counter (ACC)
will be automatically modified after each access of DD-RAM, as selected by the “Entry Mode Set”
instruction.
Table-16 Valid DD-RAM address Ranges
Number of Character Address Range
1st
line
10
00H to 13H
6.2.9 Read Busy Flag and Address
DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
BF ACC
RS=0, R/W=1
Tgcf"dwu{"hnci"cpf"cfftguu"tgcfu"vjg"hnci"*DH+"kpfkecvkpi"vjcv"vjg"u{uvgo"ku"pqy"kpvgtpcnn{"
qrgtcvkpi"qp"c"rtgxkqwun{"tgegkxgf"kpuvtwevkqp0"Kh"DH"ku"3.vjg"kpvgtpcn"qrgtcvkqp"ku"kp"
rtqitguu0"
""""DH?3<"dwu{"uvcvg"
""""DH?2<"tgcf{"hqt"pgzv"kpuvtwevkqp."eqoocpf"tgegkxcdng0"
The next instruction will not be accepted until BF is reset to 0.Check the BF status before the next write
operation. At the same time, the value of the address counter (ACC) in binary AAAAAAA is read out. This
address counter (ACC) is used by both CG-RAM and DD-RAM address and its value is determined by the
previous instruction. The address counter are the same as for instructions set CG-RAM address and set
DD-RAM address.
804032"Ytkvg"Fcvc"vq"EI"qt"FF/TCO"
DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
Data Read
RS=1, R/W=0
This instruction writes 8-bit binary data (DB7 to DB0) from CG-RAM or DD-RAM.
The previous designation determines whether CG-RAM or DD-RAM is to be read.
Before entering this read instruction, either CG-RAM or DD-RAM address set instruction must be executed.
If not executed, the first read data will be invalid. When serially executing read instructions, the next address
data is normally read from the second read. The address set instructions need not be executed just before this
read instruction when shifting the cursor shift instruction (when reading out DD-RAM).
The operation of the cursor shift instruction is the same as the set DD-RAM address instruction.
After a read, the entry mode automatically increases or decreases the address by 1.
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
M0121LB-222LHAR2-I1
MODULE VF CHAR 1X21 14.5MM
M0216MD-162MDBR2-J
MODULE VF CHAR 2X16 9.22MM
M0216SD-162SDAR1
MODULE VF CHAR 2X16 4.34MM
M0216SD-162SDAR2-1
MODULE VF CHAR 2X16 5.34MM
M0216SD-162SDAR8
MODULE VF CHAR 2X16 5.34MM
M0220MD-202LDAR2
MODULE VF CHAR 2X20 10.5MM
M0220MD-202MDAR1-1
MODULE VF CHAR 2X20 8.95MM
M0220MD-202MDAR1-3
MODULE VF CHAR 2X20 8.95MM
相关代理商/技术参数
M0121LB-222LHAR2-I1
功能描述:MODULE VF CHAR 1X21 14.5MM RoHS:是 类别:光电元件 >> 显示器模块 - 真空荧光(VFD) 系列:- 产品变化通告:MO VPT Module Change 16/Aug/2010
2x20 Screen Board Change 10/Nov/2009 标准包装:1 系列:VK202-25 外形L x W x H:116.00mm x 37.00mm x 29.48mm 可视范围:89.75mm L x 11.50mm W 显示格式:20 x 2 显示器类型:字符 格式:5 x 7 点 电源电压:9 V ~ 35 V 字符尺寸:4.70mm H x 2.40mm W 点数:- 接口:串行 工作温度:-20°C ~ 70°C 相关产品:VFD-GREEN-202-ND - LCD ACCY VFD FILTER 20X2 GREENVFD-RED-202-ND - LCD ACCY VFD FILTER 20X2 REDVFD-GREY-202-ND - LCD ACCY VFD FILTER 20X2 GRAYVFD-BLUE-202-ND - LCD ACCY VFD FILTER 20X2 BLUE
M012437-00A
制造商:Teac 功能描述:1" HIGH BLACK BEZEL - Bulk
M012437-00B
制造商:Teac 功能描述:1" HIGH BLACK BEZEL - Bulk
M012450-00A
制造商:Teac 功能描述:SHUTTER;BLACK 制造商:Teac 功能描述:FLAP - Bulk
M0128-SS-20
制造商:RAF Electronic Hardware 功能描述:
M0132-SS-20
制造商:RAF Electronic Hardware 功能描述:
M0133-SS-0
制造商:RAF Electronic Hardware 功能描述:
M0145-SS
制造商:RAF Electronic Hardware 功能描述: